AEG C67100K-MNAG1 Instrukcja Użytkownika Pobierz pdf (Strona 22)

Operating Instructions

3. Use the sensor fields + or - to set or change the required duration

until automatic switching-off (e.g. 15 minutes).

After a few seconds, the timer is started automatically and shows the

time remaining until switching-off.

In addition, the display “Timer active” for the relevant cooking zone

lights up, e.g. the top left indicator lamp corresponds to the rear left

cooking zone.

At the end of the cooking time set, the cooking zone switches off auto-

matically and an acoustic signal sounds.

4. Touch the TIMER

W sensor field to switch off the signal and indicator

lamp.

For more rapid adjustment, leave your finger on the sensor field + or

- until the required value is reached.

If the sensor field - is activated first, the time setting starts at

99 minutes. If the sensor field + is activated first, the time setting

starts at 1 minute.

Displaying the Remaining Cooking Time

0 If you select a cooking zone which is in Timer mode, the cooking time

still remaining appears in the Timer display field.

Use the Timer as a Short Time Measurer (“Minute

Minder”)

The Timer function can also be used as a short time measurer without

the automatic switch-off function, provided that the timer is not

already being used for 1 or more cooking zones. No cooking zone may

be selected in this case. The sensor field cooking zone with the decimal

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 38 39

Brak uwag

AEG C67100K-MNAG1 Instrukcja Użytkownika Strona 22