AEG HD634170NB Instrukcja Użytkownika Pobierz pdf (Strona 5)

• Seal the cut surfaces with a sealant to

prevent moisture to cause swelling.

• Protect the bottom of the appliance

from steam and moisture.

• Do not install the appliance adjacent

to a door or under a window. This pre-

vents hot cookware to fall from the ap-

pliance when the door or the window

is opened.

• If the appliance is installed above

drawers make sure that the space, be-

tween the bottom of the appliance

and the upper drawer, is sufficient for

air circulation.

• Make sure that the ventilation space of

2 mm, between the worktop and the

front of the below unit, is free. The

warranty does not cover damages

caused by the lack of an adequate

ventilation space.

• The bottom of the appliance can get

hot. We recommend to install a non-

combustile separation panel under the

appliance to prevent access to the

bottom.

Electrical connection

WARNING!

Risk of fire and electrical shock.

• All electrical connections must be

made by a qualified electrician.

• The appliance must be earthed.

• Before carrying out any operation

make sure that the appliance is dis-

connected from the power supply.

• Use the correct electricity mains cable.

• Do not let the electricity mains cable

tangle.

• Make sure the mains cable or plug (if

applicable) does not touch the hot ap-

pliance or hot cookware, when you

connect the appliance to the near

sockets

• Make sure the appliance is installed

correctly. Loose and incorrect electrici-

ty mains cable or plug (if applicable)

can make the terminal become too

hot.

• Make sure that a shock protection is

installed.

• Use the strain relief clamp on cable.

• Make sure not to cause damage to the

mains plug (if applicable) or to the

mains cable. Contact the Service or an

electrician to change a damaged

mains cable.

• The electrical installation must have an

isolation device which lets you discon-

nect the appliance from the mains at

all poles. The isolation device must

have a contact opening width of mini-

mum 3 mm.

• Use only correct isolation devices: line

protecting cut-outs, fuses (screw type

fuses removed from the holder), earth

leakage trips and contactors.

Gas connection

• All gas connections should be made

by a qualified person.

• Before installation, make sure that the

local distribution conditions (nature of

the gas and gas pressure) and the ad-

justment of the appliance are compat-

ible.

• Make sure that there is air circulation

around the appliance.

• The information about the gas supply

is on the rating plate.

• This appliance is not connected to a

device, which evacuates the products

of combustion. Make sure to connect

the appliance according to current in-

stallation regulations. Pay attention to

requirements regarding adequate

ventilation.

2.2 Use

WARNING!

Risk of injury, burns or electric

shock.

• Remove all the packaging, labelling

and protective film (if applicable) be-

fore first use.

• Use this appliance in a household en-

vironment.

• Do not change the specification of this

appliance.

• Do not let the appliance stay unatten-

ded during operation.

• Do not operate the appliance with wet

hands or when it has contact with wa-

ter.

ENGLISH 5

1 2 3 4 5 6 7 8 9 10 ... 71 72

Komentarze do niniejszej Instrukcji

Brak uwag