AEG HG694840NB Instrukcja Użytkownika Pobierz pdf (Strona 10)

6.2 Pan supports

The pan supports are not

resistant to washing in a

dishwasher. They must be

washed by hand.

1. Remove the pan supports to easily

clean the hob.

Be very careful when you

replace the pan supports

to prevent the hob top

from damage.

2. The enamel coating occasionally can

have rough edges, so be careful

when you wash the pan supports by

hand and dry them. If necessary,

remove stubborn stains with a paste

cleaner.

3. After you clean the pan supports,

make sure that they are in correct

positions.

4. For the burner to operate correctly,

make sure that the arms of the pan

supports are aligned with the centre

of the burner.

6.3 Removing pan supports

After cleaning hobs, make sure that pan

supports are in a correct position. In

order to properly place the pan

supports, make sure that an arm of the

pan support is positioned in

correspondence with the grips placed at

the base of the burner as shown in the

picture. This way, the pan support will be

stable and fixed.

6.4 Cleaning the hob

• Remove immediately: melted plastic,

plastic foil, and food with sugar. If not,

the dirt can cause damage to the hob.

• Remove when the hob is sufficiently

cool: limescale rings, water rings, fat

stains, shiny metallic discoloration.

Clean the hob with a moist cloth and

some detergent. After cleaning, rub

the hob dry with a soft cloth.

6.5 Cleaning the flame

spreader

You can wash the flame

spreaders in a dishwasher.

WARNING!

Let the flame spreaders cool

down before you clean

them.

Light stains:

Wash the flame spreader with warm

water and soap and dry it with a soft

cloth.

Medium stains:

Use the dishwasher. Place the flame

spreader on the bottom rack in a flat

position, with the top side up.

Heavy stains:

Clean the flame spreader with warm

water and soap, then wash it in the

dishwasher. If the stain is still present

wash the top of the flame spreader with

a grill cleaner and run through the

dishwasher again.

Use a toothpick to clean the holes of the

flame spreader.

6.6 Cleaning the spark plug

This feature is obtained through a

ceramic ignition candle with a metal

electrode. Keep these components well

clean to prevent difficult lighting and

check that the burner crown holes are

not obstructed.

6.7 Periodic maintenance

Speak to your local Authorised Service

Centre periodically to check the

www.aeg.com

10

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

Komentarze do niniejszej Instrukcji

Brak uwag