AEG F88722IM0P Instrukcja Użytkownika Pobierz pdf (Strona 10)

6. SETTINGS

6.1 Programme selection

mode and user mode

When the appliance is in programme

selection mode it is possible to set a

programme and to enter the user mode.

In user mode, the following settings

can be changed:

• The activation or deactivation of the

rinse aid dispenser.

• The level of rinse aid according to the

required dosage.

These settings will be saved until you

change them again.

How to set the programme

selection mode

The appliance is in programme selection

mode when the programme indicator

is on and the display shows the

programme duration.

When you activate the appliance, usually

it is in programme selection mode.

However, if this does not happen, you

can set the programme selection mode

in the following way:

Press and hold simultaneously Delay and

Option until the appliance is in

programme selection mode.

6.2 The rinse aid dispenser

The rinse aid helps to dry the dishes

without streaks and stains.

The rinse aid is automatically released

during the hot rinse phase.

You can set the released quantity of rinse

aid between level 1 (minimum quantity)

and level 6 (maximum quantity). Level 0

will deactivate the rinse aid dispenser

and no rinse aid will be released.

Factory setting: level 4.

How to set the rinse aid level

The appliance must be in programme

selection mode.

1. To enter the user mode, press and

hold simultaneously Delay and

Option until the indicators ,

and start to flash and

the display is blank.

2. Press Start.

• The indicator

and go

off.

• The indicator

continues to flash.

• The display shows the current

setting: e.g. = level 4.

– The levels of rinse aid are

from 0A to 6A.

– Level 0 = no rinse aid is

released.

3. Press Start again and again to

change the setting.

4. Press the on/off button to confirm

the setting.

6.3 The rinse aid empty

notification

When rinse aid chamber is empty, the

rinse aid indicator is turned on notifying

to refill rinse aid. If you are using multi-

tabs containing rinse aid and you are

satisfied with the drying result, you can

deactivate the notification for refilling

rinse aid. However, we recommend that

you always use rinse aid for best drying

performance.

If you use standard detergent or multi-

tablets without rinse aid, activate the

notification to keep the rinse aid refill

indicator active.

How to deactivate the rinse

aid dispenser

The appliance must be in programme

selection mode.

1. To enter the user mode, press and

hold simultaneously Delay and

Option until the indicators ,

and start to flash and

the display is blank.

2. Press Program.

• The indicator and

go off.

www.aeg.com

10

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 27 28

Komentarze do niniejszej Instrukcji

Brak uwag