AEG BOCSEM Instrukcja Użytkownika Pobierz pdf (Strona 23)

3.

Pull the support out of the rear catch.

Installing the shelf supports

Install the shelf supports in the opposite

sequence.

STEAM GENERATION SYSTEM

CAUTION!

Dry the steam generator after

each use. Soak up water with the

sponge.

Remove the limescale residue

with water and vinegar.

CAUTION!

Chemical de-scaling agents can

damage the steamer enamel. Fol-

low the instructions of the manu-

facturer.

Cleaning the water drawer and the

steam generator:

1.

Fill the water and vinegar mixture (ap-

proximately 250 ml) through the wa-

ter drawer in the steam generator.

Wait for approximately 10 minutes.

2.

Remove the water and vinegar with

the sponge.

3.

Pour clean water (100-200 ml) in the

water drawer to flush the steam gen-

eration system.

4.

Remove water from the steam gener-

ator with the sponge and rub dry.

5.

Keep the door open to let the appli-

ance dry fully.

LAMP

WARNING!

There is a risk of electrical shock.

The lamp and the lamp glass cov-

er can be hot.

Before you change the lamp:

• Deactivate the appliance.

• Remove the fuses from the fuse box or

deactivate the circuit breaker.

CAUTION!

Put a cloth on the bottom of the

steamer cavity. This prevents

damage to the lamp glass cover

and the cavity.

Replacing the side lamp:

1.

Remove the left shelf support.

2.

Use a torx 20 screwdriver to remove

the cover.

3.

Remove and clean the metal frame

and the seal.

4.

Replace the lamp with a suitable 300

°C heat-resistant lamp.

Use the same oven lamp type.

5.

Install the metal frame and the seal.

Tighten the screws.

6.

Install the left shelf support.

STEAMER DOOR

Remove the door to clean the inner side

of the appliance more easily.

ENGLISH

23

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 31 32

Komentarze do niniejszej Instrukcji

Brak uwag